Rubber in Space - Yes, it is Rocket Science...
Dr. Bryan Willoughby (Polymatrix Ltd). Presented on the 27th March 2012 at Independent Polymer Technology Ltd

 Click HERE to read

Manufacturing Using "Light" and "Dust"
Dr. Mark Stanford ( Wolverhampton Uni). Presented on the 9th February 2012 at Uni. Wolverhampton, Telford Campus

 Click HERE to read

Henry Wickham - EcoPirate or Saviour of the Amazon Rain Forest?
Ken Hodd (Medical Polymers Ltd). Presented on the 22nd November 2011 at Smithers Rapra Ltd

 Click HERE to read

Water Soluble Film - MonoDose™ Packaging
Dr. Dave Lee (MonoSol, LLC). Presented on the 23rd February 2011 at Smithers Rapra Ltd

 Click HERE to read

Biomedical Polyurethane Developed Within the Custom IMD Project
Dr. Steve Rowlands (Smithers Rapra Ltd). Presented on the 20th October 2010 at Smithers Rapra Ltd

 Click HERE to read

Plastics - The Environmentalist's Friend
Colin Williamson (Smile Plastics Ltd). Presented on the 11th March 2009 at Rapra Technology

 Click HERE to read

Rheology - A Practical Approach To Quality Control
Mark Edwards (Gammadot Rheology). Presented on the 28th November 2008 at Rapra Technology

 Click HERE to read

REACH
Dr. Steffen Erler (Smithers Rapra Ltd). Presented on the 29th October 2008 at Rapra Technology

 Click HERE to read

Engineering Thermoplastics Supply-Side Rationalisation
Dr. Michael Taylor (Excitim Ltd). Presented on the 6th December 2006 at Rapra Technology

 Click HERE to read

Progress in Developing Wood Plastics Composites in Europe
Prof. Geoff Pritchard (Hackwell Group). Presented on the 1st November 2006 at Rapra Technology

 Click HERE to read

Towards the accomodating Intraocular Lens
Kenn Hodd (Medical Polymers Ltd). Presented on the 23rd March 2006 at Rapra Technology

 Click HERE to read

Vitrolite - A novel polymer process aid based on volcanic ash
Steve Houlston ( VitroCo). Presented on the 5th October 2005 at Rapra Technology

 Click HERE to read

Development of the Minimixer
Dr. Martin Gale (Telford Polymer Association). Presented on the 19th January 2005 at Rapra Technology

 Click HERE to read

Polymer Rheology - from tensor maths to practical benefits for processors & end users alike
Dr. Don Fleming (Director, Fleming PTC). Presented on the 19th April 2004 at Rapra Tehnology

 Click HERE to read

MuCell - The Foaming Process for Thin Walled Products
Ian Hyland (ENGEL UK). Presented on the 10th February 2004 at Rapra Technology 		Click HERE to read

From filling to warpage in 3D
Andi Clements (Rapra Technology). Presented on the 19th November 2002 at Rapra Technology 		Click HERE to read

A Presentation On MiniDisc Manufacture
Matthew Fletcher (Maxell Europe Ltd). Presented on the 7th May 2002 at Maxell (Europe) Ltd		 Click HERE to read


 
Back to Top


 

A Visit to Brownhills Gardens, Ruyton XI Towns
Joy Harrison. An overview of the visit to Brownhill gardens, Ruyton XI towns held on July 30th 2009		  Click HERE to read

A Tour and Wine Tasting at Wroxeter Roman Vineyard
Roger Cole. An overview of the superb evening held on September 6th 2005		  Click HERE to read

A visit to Coleham pumping station (In steam)
Martin Gale. An overview of the visit held in July 2003		 Click HERE to read


 
Back to Top


 

Polymer Cluster - General Information Flyer
Released July 2003		 Click HERE to read

Telford Polymer Industries First "Learning & Earning" Schools Event
Released March 2003		 Click HERE to read

New Rubber & Plastics Division - IoM3 information sheet
Released March 2003		 Click HERE to read

Car design for recycling - The end of life vehicle (ELV) directives
Peter Ford (Land Rover). Released 13th November 2002		 Click HERE to read

 
Back to Top



None currently available
  


 
Back to Top