Recommended Adjustments to solve moulding problem
Injection Pressure
Injection Temperature
Injection Speed
Screw Speed
Holding Pressure
Holding Time
Clamp Pressure
Barrel Temperature
Mould Temperature
Material Temperature
Size of Sprue
Size of Runners
Sizes of Gates
Size of Vents
Dry Material
Increase Amount of Material
Reduce Amount of Regrind
Clean Mould Surfaces
Clean Vents
Change Gate Location
Increase Cooling Time

This guide reproduced by kind permission of SkidMark Multimedia Productions. Virtual Moulder is a product of SkidMark Multimedia Productions. © MMIV